Adventure Travel Inspiration and How to Find It

All travellers know the feeling, “I want to travel, I want to experience new things and I want to do something completely different to what I am doing now.” The corresponding feeling is usually along the lines of, “But what? Where? And how?”

This is actually made harder with the vast selection of trips currently available, especially to adventure travellers. Below are three ways to make inspiration a little easier for those of you reading with travel on your mind.

Travel Reviews

One of the best ways to find adventure travel inspiration is by reading about other peoples’ experiences. This is easily done by looking at travel reviews. These travel reviews provide an insight, not only into the service and value of adventure travel providers, but also the experiences that people have had. Adventurers are drawn to places of interest, especially ones that not many have been. Never underestimate an adventure traveller’s need for that feeling of exploration.

Travel reviews also provide inspiration through density. For example, the crowds may congregate in Kenya for a Safari or in Peru to hike Machu Picchu, both areas would then receive a high number of reviews. With this knowledge, an adventure traveller can easily pick his or her ideal experience, based on how crowded they want their trip to be.

Adventure News

Read adventure news and updates. One of the most useful sources of inspiration comes from adventure travel industry news. Details of current adventure vacation offers, new destinations available and new activities to try will really get your imagination going. It’s also helpful when you’re on a tight budget – discovering new adventures on your doorstep is the latest travel trend.

How do you find the best deals in the market? Just keep a watchful eye on the best adventure news. Finding fresh adventures is one of the fundamental reasons that the adventure travel market continues to grow (even in spite of economic/political challenges). Travellers are always on the lookout for the next destination or activity and one of the most fruitful sources for inspiration is blogs from explorers and adventures on the cutting edge. New routes through jungles, new epic cycle journeys or a new way to use a helicopter to launch your adventure, these blogs have the answers.

Adventure Travel Market Overview

Finally, finding inspiration can be a simple as looking at the adventure travel market as a whole – what can I do and where?

This might be browsing through an atlas and pointing at the topographic point of interest or looking at a list of adventures on a provider’s site. An easier option still is to utilize some of the powerful adventure travel search sites out there. Simply click on an activity or country and see where or what you can do.

So, if you need adventure travel inspiration remember these three points:

1. Read travel reviews
2. Keep an eye on adventure news and
3. Look out for global adventure travel search sites.

5 Tips To Help You Keep Your Conveyor Chains Operational

Conveyor chains are used to drive different types of conveyor units and use different types of power transmission. If you want to get the most out of your equipment, make sure you maintain them. This is even more important if they are installed in the mining and construction industry. Given below are a few tips that can help you ensure your conveyor chains will continue to work properly.

1. Follow the Maintenance Schedule

First of all, you may want to inspect and service them to ensure proper alignment, lubrication and tension. If inspected on a regular basis, they can last up to 15,000 hours. It’s better if you schedule filter and oil changes every 3 months. On the other hand, the cleaning of bigger parts, such as shafts, machine lubrication and replacement of damaged or worn sprockets and sideplats should be done on an annual basis.

Following the maintenance schedule is paramount, especially if you have installed the conveyor chains in the construction and mining industry.

2. Lubricate Wisely

For smooth operation, conveyor drives and chains should be free of moisture and dust. Most of these systems require petroleum-based oil. It’s not a good idea to opt for heavy greases and heavy oils. The reason is that they are overly stiff and can’t lubricate the system properly. Given below are some common ways of lubricating the conveyor chains. Some of them are listed below:

Stream lubrication
Disk lubrication
Drip lubrication
Manual lubrication

Based on the power and chain speed, the right method can be used. For reducing wear and tear and enjoying all the benefits, it’s important that you lubricate the system properly.

3. Get Heat-Treated Parts

Heat treatment can be used to improve the mechanical components. Therefore, manufacturers control the treatment methods for best results. In other words, to reduce wear and tear, it’s important to perform proper heat treatment.

Case hardness and depth are the two primary parts of component heat transfer. This plays a great role as far as resistance and durability is concerned. If the depth is too much, the parts may break while working due to brittleness.

4. Make sure there is Proper Alignment and Tension

Make sure you check the slack span and chain tension, and perform the required maintenance. If you need to reduce the tension, you can eliminate two pitches and then connect the chain again. However, you may need to replace the entire chain if the wear and tear goes beyond the functional limits.

Also, you may not want to connect new chains to the worn one as it can damage the drive. Misaligned sprockets can also cause the link plates of the roller chain to get a lot of wear and tear.

5. Check the Primary Parts

Typically, conveyor chains have two main parts that go through wear and tear: sprockets and chain. Chain stretching happens due to this very reason and results in the complete replacement of the sprockets and chain.

Therefore, you should inspect conveyor chains for any broken parts, deformation and cracks.

In short, these are the tips you can follow to maintain your roller chains.

Adventure Travel – Forsake the Well-Trodden Path!

Adventure travel often conjures up images of mountain climbing, whitewater rafting, scuba diving and four wheel driving. While these are certainly activities associated with adventure travel, adventure travel may involve something as sedate as a wine tasting tour in Bordeaux, France. Adventure travel is simply to go above and beyond one’s normal known area, seeking out experiences which are unfamiliar. The travel destination may be as close as a few kilometers from your home, or it can be thousands of kilometers away in an exotic location in Africa or Asia.

Maybe it has to do with the stressful and fast-paced lives we are leading, that adventure travel has become one of the fasting growing segments of the travel industry. More and more travelers are abandoning the usual beach resorts, and are actively seeking new experiences in their travels. These trips often bring significant personal discovery, development of new skills and knowledge and cross-cultural experiences.

Adventure travel is not for everyone. It is for an individual with the thirst for new experience, one who dares to forsake the well-trodden path. Health and age may restrict the traveler to less-strenuous activities, but that does not stop the traveler from other forms of adventure travel.

It is undeniable that some adventure travel activities carry additional risk. Trekking across the desert is definitely more dangerous than planting yourself under an umbrella at the beach. As in most travel situations, having adequate planning and practicing common sense will go a long way in minimizing risk.

An adventure travel need not be expensive. In most cases, you would not be staying in five star hotels, eating in fancy restaurants and taking limousine rides. Instead, you would probably be staying in guesthouses, eating at local food stalls and taking public transport. These usually more than help to hold the line on the total cost.